Filter
Top Products
Preparing
To use the Battery Pack
ENGLISH
1
4
2 3
OFF
19
How long will the battery last for recording?
✤ Depends on how often you are likely to use the zoom feature during recording.
Recharging the Battery Pack
1. Attach the battery pack to the camcorder.
2. Connect the AC Power Adapter to a AC cord and
plug the AC cord into a wall socket.
3. Connect the DC cable to the camcorder.
4. Turn the power off on the camcorder, and the recharging
indicator will start flashing, indicating the battery is charging.
- Flashing once a second : the battery is less
than 50% charged.
- Flashing twice a second : the battery is between
50% ~ 75% charged.
- Flashing three times a second : the battery is between 75% ~ 100% charged.
- Constantly stays on : Charging is complet.
- On for a second and off for a second : there is an error and the charger needs to be reset.
5. If recharging is completed, separate the camcorder,AC power adapter, and battery pack.
- Even if the power is turned off, the battery will still discharged over time if left connected to the camera.
Note:
Battery pack may be charged a little at the time of purchase.
00606F VP-W80/W87 UK (1-19) 2/17/03 11:22 AM Page 19