Filter
Top Products
54
ENGLISH ENGLISH
Playing back the Tape
DSE in PLAYER mode
✤ The procedure for using DSE in PLAYER mode is the same as the procedure for using DSE in CAMERA mode,
except that the power switch must be set to PLAYER instead of CAMERA.
Please refer to pages 36 and 37.
Note:
The GHOST, STROBE, NEG., MIRROR, MOSAIC, CINEMA and 16:9(WIDE) effects will not operate when
your camcorder is in PLAYER mode.
✤ Pressing the DSE button will scroll through the available settings.
Stop at the one you require.
Cleaning and Taking care of the Camcorder
Cleaning the Viewfinder
◆ Releasing the Eyepiece
1. Pull the viewfinder up and then turn the screw counter-clock-wise.
2. Pull the EYEPIECE away from the viewfinder.
3. Clean the EYEPIECE and the VIEWFINDER screen with a soft
cloth and cotton swab or a blower.
◆ Reattaching the Eyepiece
4. Reposition the EYEPIECE back on the VIEWFINDER.
5. Insert and tighten the screw.
Maintenance
12
4
3
00606F VP-W80/W87 UK (45-64) 2/17/03 11:24 AM Page 54