-9-
7
Replace Lower Lens Cover. Slide Light-Block Sheets into the guide of Lower Lens Cover and set
them in front of the flap. (See Fig. 7.) Fix Lower Lens Cover with 4 Screws C. (See Fig. 2.)
8
Replace Upper Lens Cover. Slide Light-Block Sheets into the guide of Upper Lens Cover and set
them in front of the flap. (See Fig. 7.) Fix Upper Lens Cover with 2 Screws A. (See Fig. 1.)
9
Turn the projector on and operate Lens shift, Zoom and Focus fully to check Light-Block Sheets. If
Light-Block Sheets interfere with those operations, check Light-Block Sheets are set properly.
Fig-7
LOWER LENS
COVER
UPPER LNES
COVER
LIGHT-BLOCK
SHEETS
FLAP
Slide into front
of the flap.
Slide into front
of the flap.
FLAP
Slide upper both side of LIGHT BLOCK
SHEETS into between and
.
2
1
CABINET
GUIDE
1
2