Filter
Top Products
-7-
5
Connect Lens Motor Lead to the connector
"K96T" on the circuit board under the lens. Fix
Lens Motor Lead with the lead holder on the cir-
cuit board.
Fig-5
LEAD
HOLDER
K96T
CONNECTOR
Fig-4
LENS MOTOR LEAD
LENS MOUNTING
BLACKET
GUIDE PIN
4
Replace Lens Cap on the rear (mounting side) of Projection Lens and mount the lens on Lens
Mouting Bracket with 4 Screws. To mount the lens with Lens Motor on the right. (See Fig. 4.)
LOCATE MOTOR
ON RIGHT SIDE
DRIVER
IN THE LENS
Part No. (610 275 6029)