Sanyo VCC-MD500 Security Camera User Manual


 
− 24 −
exclusiveprocessingtable.
Settings to be
changed.
↓Current setting.
Auto Iris
V-RESO UP
ON
SENSE UP
ON
Manual Iris
(EI ON)
High speed
shutter mode
Prolonged exposure
shutter mode
MOTION
ON
DNR
ON
AGC
OFF
D/N
AUTO
AUTOPURSUIT
ON
Auto Iris
V-RESO UP
ON
V-RESO UP
OFF
V-RESO UP
OFF
V-RESO UP
OFF
SENSE UP
ON
1
2
(SENSE UP invalid)
3
3
2
2
2
Manual Iris
EI ON
Auto Iris
EI invalid
4
× ×
High speed
shutter mode
Nomal mode Nomal mode
Prolonged exposure
shutter mode
Prolonged exposure
shutter mode
×
Nomal mode Nomal mode
High speed
shutter mode
× ×
MOTION
ON
× ×
MOTION
OFF
DNR
ON
5
DNR invalid
AGC
OFF
×
6
AGC
ON
D/N
AUTO
×
AUTO PURSUIT
ON
× ×
AUTO
PURSUIT
OFF
○:
Setting change can be done at once.
×:
Setting can not be changed.
△:
Enable to change the setting under certain condition.
Other than those above: "Changed setting" becomes valid but "Current setting" will be automatically changed to the settings mentioned in the table.
※ 1:
Unable to set when MOTION ON or AUTO PURSUIT ON. Additionally, AGC will be ON and shutter speed is changed to normal mode.
2
Enable to set during Manual Iris setting.
3
Enable to set during Manual Iris (EI OFF) setting.
4
SENSE UP setting will be invalid. (It will be valid when changing the setting to AUTO Iris.)
5
Enable to set during AGC OFF.
6
DNR is invalid.(It will be valid when changing the setting to AGC On.)
Communications Protocol
Model: VCC-MD800/700/600/500/400/300