Filter
Top Products
English 106
NORMAL/SHOOTING
HINT
If the motion compensation does not seem to be working...
iDue to the mechanical characteristics of this function, it may not be
possible for the camera to compensate for violent motion.
iIf the digital zoom (page 81) is being used, the large magnification factor
may make it difficult for the motion compensation function to work correctly.
Can’t set the “photo stabilizer” setting?
iThe photo stabilizer is automatically turned off ] after any of the
following operations.
h Pressing the flash button [?] to open the flash unit.
h Setting the exposure to T, g or H (page 114).
h Setting the still image NR (noise reduction) setting (page 150) to “ON”.
h Setting the flicker reduction setting (page 152) to “ON”.
h Starting video clip recording.
h Setting the camera to the sequential shots mode (page 95).
Did the field angle change?
iWhen motion compensation is enabled, the field angle changes when
capturing still images.
When motion compensation is enabled,
iThe following icons are shown on the monitor:
Did the scene select setting change?
iWhen the motion compensation is set to \, if the scene select setting is
/, + or Q, it will automatically change to =.
Full-HD
The movie stabilizer is active
The photo stabilizer is active
Both the movie stabilizer and the photo stabilizer
are active