Sanyo VPC-CG10EX Digital Camera User Manual


 
OPTION SETTINGS
English 132
2 Select the desired setting, and press the SET button.
h The screen to change the parameter for the selected setting appears.
<If “TV SYSTEM” is selected>
NTSC: Outputs NTSC video signals.
PAL: Outputs PAL video signals.
<If “TV TYPE” is selected>
4:3: Use this setting when a TV having an aspect ratio of 4:3 is
connected.
16:9: Use this setting when a TV having an aspect ratio of 16:9 is
connected.
<If “COMPONENT” is selected>
720p: Choose this setting if the video clip was recorded in the &
mode. (Also, choose this setting if your TV is equipped with a
720p connector.)
480p: Choose this setting if the video clip was recorded in the )
mode. (Also, choose this setting if your TV is equipped with a
480p connector.)
h Does not work with 480i connector.
h Select the setting that matches the mode in which the video clip
was recorded. However, your TV may not support the recorded
mode, so please refer to the specifications for the TV type
indicated in parentheses.
3 Toggle the SET button up or down to select the desired parameter.
4 Press the SET button.
5 Press the MENU button.
h This completes the TV output setting.