Sanyo VPC-E1414 Digital Camera User Manual


 
28
Using the Record Menu
If you are in Photo Mode, you can access the Record menu simply by pressing the MENU button on your
camera.
When the menu is displayed, use the 4-way navigation control and the OK button to move through menu
selections and apply your desired settings. To close the menu anytime, press the menu button again.
Record Menu
The Record menu allows you to change modes, and setup other
capture settings.
To go to Record Menu:
Set the Mode switch Photo Mode [
].
1. Press
to launch the Record Menu.
2. Use the
or keys to move through the menu
3. To select an item, press
or OK button.
4. Change the submenu settings using the 4-way navigation
control.
5. Press the OK button to save and apply settings.
Setting the Scene Mode
By simply selecting one of the following 34 modes, you can
capture the image with the most appropriate settings.
1. From the Record Menu, press to select Scene Mode.
2. Use the navigation controls to move through the selection.
3. Press the OK button to save and activate the selected
scene mode.
When Lens temperature over 60ºC, the camera will shutdown automatically.