Filter
Top Products
EN-28
Playing Back Still Images/Video Clips on TV
You can also playback your images on a TV screen. Before connecting to any devices,
make sure to select NTSC / PAL system to match the video input system of the TV/video
equipment you are going to connect to the digital video camera, then turn all connected
devices off.
1. Connect one end of the AV cable to the AV OUT terminal of the digital video camera.
2. Connect the other end to the AV input socket of the TV set.
3. Turn the TV and digital video camera on.
4. Playback the still images/video clips.
5. The method of operation is the same as playing back still images and video clips!on the
digital video camera.
Connecting the Digital Video Camera to HDTV
HD TV (High Definition Television) is a digital television broadcasting system with!better res-
olution than traditional television systems. It can perform HD (720P) high!resolution quality.
1. Connect one end of the YPbPr (HD out) cable into the (Video IN) port on the HDTV!and
the other end into the HDTV terminal of the digital video camera.
2. Connect one end of the AV cable into the (Audio IN) socket of the HDTV and the other
end into the AV OUT terminal of the digital video camera. (Do not connect the yellow
connector to HDTV’s AV-IN.)
3. Turn the TV and digital video camera on.
The video camera will auto detect and set the settings when the cables are
connected.
Connecting for Standard TV
A/V OUT
COMPONENT (HD OUT)
HD TV
Audio IN
Video IN
<YPbPr(HD out) cable>
<AV cable>
(white)
(green)
(red)
(blue)
(green)
(red)
(blue)
(red)
(white)
(yellow)(no connection)
Audio - IN
Video - IN
(white)
(yellow)
(red)
(white)
(yellow)