EN-16
Initial Settings
Setting the Date and Time
The date/time needs to be set if and when:
Camera is turned on for the first time.
Camera is turned on after leaving the camera without the battery for an extended
period of time.
Follow these steps to set the correct date and time:
1. Press the Power button to turn the power on.
2. Press the MODE button, and set the camera
mode to [ ] / [S].
In the [ ] Capture mode, the LCD
monitor display is followed by the scene
mode setting.
3. Press the MENU button
4. Select [Setup] with the
X
f button.
5. Select [Date/Time] with the c/ d
buttons, and press the SET/DISPLAY button.
6. Select the date type with the c/ d
buttons, and press the SET/DISPLAY button.
Select the item’s field with the [e/
X
f
buttons and adjust the value for the date
and time with the c/ d buttons.
The time is displayed in 24-hour format.
After confirming all settings are correct,
press the SET/DISPLAY button.
7. To exit from the [Setup] menu, press the
MENU button.
P
P