Sanyo VPC-S1080 Digital Camera User Manual


 
EN-40
3. If you select [Single] in the previous step, the
figure shown on the right hand side will appear.
Select the image that you want to print with
the [/X buttons.
Select the [Print Num] (up to 99) with the
/ buttons.
After selecting the desired image and printing
number, press the
SET/DISPLAY
button to
confirm.
4. Select [Print] with the / buttons,
and press the SET/DISPLAY button to start
printing.
5. The printing starts and the figure shown on the
right hand side appears.
[COMPLETE] will be displayed
temporarily, reminding you that the printing
procedure is finished.
If a print error is detected, [PRINT
ERROR] will be displayed.
The image printing may be failed if the power to the camera is cut off.