Filter
Top Products
EN-38
Troubleshooting
Refer to the symptoms and solutions listed below before sending the camera for
repairs. If the problem persists, contact your local reseller or service center.
Symptom Cause
Solutions / Corrective
Actions
The power does not
come on.
The batteries are not loaded. Load the batteries correctly.
The batteries are exhausted. Replace with a new set of
batteries.
The batteries or
camera feels warm.
Long period of continuous use
of the camera or the flash.
Even if I press the
shutter button, the
camera does not
shoot.
The shutter button is not
pressed all the way down.
Press the shutter button all the
way down.
The internal memory or
memory card does not have
any free capacity.
Insert a new memory card, or
delete unwanted files.
The flash is charging. Wait until the status LED stops
blinking.
The memory card is
write-protected.
Remove the write-protection.
Although it is set to
auto focus, it does
not focus.
The lens is dirty. Wipe clean with a soft, dry cloth
or lens paper.
The distance to the subject is
smaller than the effective range.
Get your subject within the
effective focus range.
Files cannot be
deleted.
The file is protected. Cancel protection.
The memory card is
write-protected.
Remove the write-protection.
Cannot download
images.
The free space on the hard
disk in your computer may be
insufficient.
Check whether the hard disk has
a space for running Windows,
and if the drive for loading image
files has a capacity at least that
of the memory card inserted in
the camera.
No power supply. Replace with a new set of
batteries.