Sealife SL510 Digital Camera User Manual


 
46
IX. Care and Maintenance
Immediately after using camera underwater, soak camera in a
fresh water tub for about 10 minutes. Remove USB cover and
rinse USB contacts.
While holding camera underwater, push each button a few
times to rinse out trapped saltwater.
Dry housing with clean soft towel after removing from fresh
water tub. Never let water dry on the lens or LCD window,
which can cause water drop stains.
Do not let camera sit in direct sunlight for prolonged periods of
time. Keep camera in a shaded area or under a dry towel.
Make sure camera is perfectly dry before storage. Store camera
in a clean dry area.
Do not disassemble this product; there are no user-serviceable
parts inside and will void warranty.
Keep camera away from extreme temperatures or prolonged
exposure to direct sunlight. Storage temperature range is -20°F
to 140°F (-29°C to 60°C).
For long-term storage, charge battery to about 50% or more.
Storing camera with 0% charge may shorten battery lifespan or
permanently damage battery.
Opening and tampering with the camera will void your
warranty.
Battery may only be replaced by Authorized SeaLife Service
Center. Risk of explosion if battery is replaced by incorrect type.
Dispose of used batteries according to your local laws.