Filter
Top Products
On-Screen Display Manual
7
SECO-LARM U.S.A., Inc.
AGC (AUTOMATIC GAIN CONTROL): A higher gain
increases brightness, but also increases any noise.
A. OFF: Deactivates the AGC function.
B. LOW: Sets automatic gain control to LOW.
C. MIDDLE: Sets automatic gain control to MIDDLE.
D. HIGH: Sets automatic gain control to HIGH.
SENSE-UP: Selecting this will magnify existing
light sources so the camera can pick up images at
night. The values range from 2x~258x.
If the AGC mode is turned OFF, the SENSE-UP
function will be disabled.
Note:
Pressing the SET button in AUTO mode lets you adjust the image brightness by increasing
or decreasing the shutter speed (2x~258x).
The higher the level, the brighter the image becomes. However, an afterimage (ghosting)
may appear.
When SENSE-UP is activated, the increased magnification may induce noise and pixelation.
This is normal.
BLC (BACKLIGHT COMPENSATION): This camera provides intelligent light-level
control to overcome strong backlight conditions.
A. Move the indicator to BLC using the UP and DOWN buttons on the
EXPOSURE menu screen.
B. Select the desired level by using the
LEFT and RIGHT buttons.
OFF: Turns BLC function off.
BLC: Users can select and define a
specific area, and view that area clearly.
HSBLC (High Spotlight Back Light
Compensation): When there are both
bright and dark image areas,
HSBLC makes both distinct.
SENSE-UP
SENSE-UP
SENSE-UP