Sharp SND-5080 Security Camera User Manual


 
overview
22_ overview
Inside
Item Description
Alarm In / Out
terminals
ALARM IN Used to connect the alarm input signal.
ALARM OUT Used to connect the alarm output signal.
ALARM COM
Common port where the alarm output signal is connected.
GND Used for earth-grounding.
SD Memory Card
Compartment
Compartment for the SD memory card.
Reset Button
Resets the camera settings to the default. Press and hold it for about 5
seconds to turn off the system indicator and restart the system.
J
Resetting the camera requires reconfiguration of network settings (IP
address, subnet mask, gateway address etc.) using the IP Installer
software application.
3