Sharp SND-5080 Security Camera User Manual


 
English _73
M SETUP SCREEN
Audio Setup
You can configure the I/O settings of the audio source from the camera.
From the Setup menu, select the
<Audio & Video (
)> tab.
Click <Audio Setup>.
Adjust the audio I/O levels to your
preference.
Audio-In : Set the audio input value.
Audio - Out : Set the audio output
value.
When done, click [Apply].
NETWORK SETUP
Interface
From the Setup menu, select the
<Network ( )> tab.
Click <Interface>.
Set the <Interface> and <IPv6 Setup>
as necessary.
IP Type : Select an IP connection
type.
Manual : Specify the IP address,
Subnet Mask, Gateway, DNS1,
and DNS2.
PPPoE : Specify the DNS1, DNS2, ID and password.
DHCP : Specify the DNS1 and DNS2.
If you set it to <Manual>, you should specify the IP, Subnet Mask, Gateway, DNS 1 & 2 manually.
MAC Address : Shows the MAC address.
IP Address : Displays the current IP address.
Subnet Mask : Displays the <Subnet Mask> for the set IP.
Gateway : Displays the <Gateway> for the set IP.
DNS1/DNS2 : Displays the DNS(Domain Name Service) server address.
IPv6 Use : Specify the use of IPv6.
IPv6 Address : Obtains the IPv6 address to access the IPv6 network.
When done, click [Apply].
1.
2.
3.
y
y
4.
1.
2.
3.
y
-
-
-
y
y
y
y
y
y
y
4.