Filter
Top Products
LCD Control Panel Illuminator: 5
• Push housing control button activates the control panel backlight [LCD
Illuminator], allowing the display to be read underwater.
Light Meter/Exposure Compensation Control: Dual Control Swivel Button: 6
• Rotate housing control over camera Light Meter control.
o Press button and rotate command dial to choose Matrix
Metering, Center Weighted Metering, or Spot Metering.
• Rotate housing control over camera exposure compensation control
o Press button and rotate command dial to choose amount of
compensation.
On-Off Control: 7
• The Control Panel will turn on and the display in the viewfinder will light.
Exposure Mode Control Dial
8
• Push down and rotate housing control to change camera’s main exposure
modes. Choose Manual, Aperture Priority, Shutter Priority, Program, or any
of several Scene Modes.
Sub Command Dial: k
• Rotating dial independently changes Apertures in M or A exposure mode.
• Rotating while pushing other control buttons affects:
o Flash Compensation
o Auto Bracketing
o White Balance Value Setting
o Image Size
Command Dial:
• Rotating dial independently changes Shutter Speeds in M or S exposure
mode.
10
• Rotating dial independently while in P mode shifts the program exposure
into flexible program, and changes the combination of shutter speeds and
apertures.
• Rotating while pushing other control buttons affects:
o Flash Mode
o Light Meters
o Exposure Compensation
o Auto Bracketing Set or Cancel
o Advance Mode
o ISO Sensitivity setting
o White Balance Mode
o Image Size
9