Sigma SD10 Camera Lens User Manual


 
Easily view images and settings
A 130,000-pixel 1.8-inch TFT liquid crystal monitor built into
the SD10’s back body panel reproduces clear, beautiful
images. With the built-in 4-Way Controller, it also serves as
an easy-to-use multifunctional interface.
White balance for the look you like
You can shoot under any lighting conditions with a choice of
white balance modes including "bright," "shady," "cloudy,"
"incandescent light," "fluorescent light," "flash," and "auto".
There’s even "custom" for customized white balance that you
can adjust according to the
shot viewed through the
back-panel LCD.
RAW format recording
The SD10 uses the RAW format –– the highest-quality record-
ing method –– to record information about light detected by the
FOVEON X3
®
direct image sensor. The RAW data format pro-
vides pure data for high-resolution images, and uses lossless
compression for more compact, yet uncompromised data files.
Exclusive SIGMA Photo Pro software reads RAW data
The SD10 comes with SIGMA Photo Pro software for changing
the look of recorded RAW data image files. It’s easy to make
adjustments (white balance, exposure, color balance, and
contrast, for example) or otherwise manipulate RAW data,
without compromising image quality or definition.
Records on CF cards and Microdrives*
The SIGMA SD10 records on reliable, high-capacity Type I
and Type II CF (CompactFlash) cards. Or, you can insert a
Microdrive* to hold even larger volumes of data.
*
This recording medium uses a high-speed hard disk, so it is more vulnerable to vibration and
shock than flash memory CF cards. If you use a Microdrive, take extra care not to expose the
camera to shock or vibration, especially during recording and playback.
Pick your power source
For around-the-world shooting versatility, the SD10 can be
powered by two CR-V3 lithium batteries ; four AA Ni-Mh
batteries or four Nickel Zinc primary batteries ; or a dedicated
AC adaptor (included with the camera).
IEEE1394 and USB Interfaces
The camera has an IEEE1394 port as well as a USB port for extra-
speedy, versatile image transfer from the SD10 to a computer.
Shoots in NTSC and PAL formats
You can switch between the NTSC video standard (used in
countries including Japan and the U.S.) and the PAL format
(used in Europe and other countries) for image playback on
TV monitors in many parts of the world.
Thumbnail screen Image info screenFull screen
Main menu screen
Zoomed screen
Frame-by-frame ISO Setting
Frame-by-frame ISO selection is among SD10’s functions that
are unmatched by any film camera. Choose among ISO 100,
200, 400, 800 and 1600 (extended option).
FOR MORE FLEXIBLE CONTROL OF IMAGE DATA
White balance / main screen
White balance / sub screen
Function
< Main Window >
This basic screen for
manipulating RAW data is a
simple, yet sophisticated
user interface for control of
various functions.
b Open RAW data files
b Transfer and save RAW image
data
b Save images (TIFF, JPEG)
b Mark, lock, rotate, and delete
images in the camera or on a
computer
< Review Window >
b Display image and magnify details up to
800%
b View highlight and shadow warning
b Mark, lock, rotate, and delete images
b Open multiple Review Windows for
side-by-side comparison
< Adjustment Controls >
b Adjust exposure, contrast,
shadows, highlights, saturation,
sharpness and X3 Fill Light
b Adjust colors
b Adjust gray balance
b Open, save, and delete custom
settings
b Check histograms
b View Overexposure and
Underexposure information
< Image Information Window >
b Check shooting information
b Check image information
b Copy information to the clipboard
Three resolution settings
Choose among three RAW data resolution shooting modes :
HI mode (2,268 x 1,512 x 3 layers) for optimal quality, MED
mode (1,512 x 1,008 x 3 layers) for recording more images at
high definition, and LOW mode (1,134 x 756 x 3 layers) for
capturing the most images per given memory capacity.
The SIGMA SD10 has exclusive advanced functions
Data recovery of deleted images*.
*
Recoverable only if no other operation has been performed after deletion of image data using
"Delete". If an image is taken right after deletion, the deleted image data cannot be recovered.
3-color histogram :
Signal levels
(appearing as dark to
bright areas in an image)
can be displayed on the monitor in
red, green, and blue. This makes it easy to check light and
shadow details.
Seamless recording and playback
Recording and playback modes aren't separated so you can
quickly take advantage of photo opportunities and record
images even while playing back other images.
Intuitive interface
Clearly marked operation panel buttons make it easy for
photographers to identify and use desired functions.
The SIGMA SD10 has an extensive variety of functions
Lock and mark function : Simplifies image sorting.
Shortcut key settings : For convenient function setting
using the OK button.
5-stage zoom and pan : Lets you zoom in up to 400%
and pan while zooming, for checking focus and image
details in camera.
Information access : Accessing information about
camera settings, CF card data and image data is simple.
Customizable view : You can customize data displayed
on the info strip, using exposure warning display ON/OFF,
quick preview duration, style setting and more.
Slide show settings : Use lock function/mark functions to
display only those images that you want to view.