Filter
Top Products
58
Using the viewing functions
Viewing menu
This section explains the menu items available when you touch [MENU] in playback mode.
For details on how to use the menu, see page 38.
Adds effects or makes corrections to a recorded image and records it as a new file. The
original image is retained.
To retouch the still images
1 Select the images you want to retouch while displaying in single-image mode.
2 Touch [MENU].
3 Touch (Retouch), then touch the desired mode.
4 Retouch the images following the instructions for each retouching mode below.
• Touching [OK] in the Retouch screen enables checking of the effects that are currently set (except for
(Trimming) and (Red Eye Correction)).
(Retouch): Retouching still images
(Trimming)
Records the zoomed playback image.
1 Touch the image or slide the zoom (W/T) lever to zoom in on
the trimming range.
2 Set the point with v/V/b/B, then touch .
3 Select an image size to record with b/B, then touch .
4 Touch [OK].
• The quality of trimmed images may deteriorate.
• The image size that you can trim may vary depending on the image.
(Red Eye Correction)
Corrects the red-eye phenomenon caused by flash.
After red eye correction is completed, touch [OK].
• You may not be able to correct the red-eye phenomenon depending
on the image.