Filter
Top Products
76
Notes
• In the case of a subject that can be focused in autofocus mode, the z indicator lights
up when the focus is confirmed. When the Wide AF area is used, the center area is
used, and when the Local AF area is used, the area that is selected with the controller
is used.
• The camera resets the focal length to (infinity) when the POWER switch is set to
ON.
• When using a tele converter, etc., rotation of the focusing ring may not be smooth.
• The correct focus is not achieved if the diopter is not adjusted properly in viewfinder
mode (page 68).
• When you turn the camera off and then on again, or change the recording mode with
the mode dial set to “AUTO” or Scene Selection, AF (Autofocus) is automatically
selected regardless of the position of the focus mode switch.
1 Set the focus mode switch to MF.
2 Rotate the focusing ring of the
lens to achieve a sharp focus.
Focusing
ring