C:\#WORK\@DPF\DPF-V1000N\Writer-OP\06_FinalDelivery\4155758111\4155758111DPFX1000NCEK\01GB-
DPFX1000NCEK\050C03.fm
Master: Right
DPF-X1000N, DPF-V1000N 4-155-758-11 (1)
31
GB
Advanced operations
*: Factory default settings
Item Setting Description
Slideshow
Settings
Interval Set a value from 3 sec., 7 sec.*, 20 sec., 1min., 5 min., 30 min., 1 hour,
3 hours, 12 hours, 24 hours for the interval between images.
Note
An image may not switch at the intervals you set on the menu, depending
on the style of the slideshow, color effect, or image size.
Effect Center cross Transitions to the next image as though the previous
image is being pushed from the center to the four
corners.
Vert. blinds Transitions to the next image as though blinds are
being lowered vertically.
Horiz. blinds Transitions to the next image as though blinds are
being pulled horizontally.
Fade* Transitions to the next image by fading out the current
image and fading in the next image.
Wipe Transitions to the next image as though the current
image is being wiped off the screen to reveal the next
image.
Random Uses the above five effects randomly.
Shuffle ON Displays images randomly.
OFF* Displays images according to the [Listing Order]
setting of [General Settings].
Color effect Color* Displays an image in color.
Sepia Displays an image in a sepia color.
Monochrome Displays an image in monochrome.
Auto Touch-up Displays an image which has been corrected by the
auto touch-up function.
Display Mode Select the desired display size from the following:
Note
The original image data will not change.
Entire image* Displays an entire image enlarged to proper size. (An
image may be displayed with margins on the top,
bottom, left and right.)
Fit to screen Zooms in at the center of the image enough to fill the
whole screen.
Note
An image may not display with the display size you set
on the menu, depending on the style of the slideshow.
BGM Plays back the accompanying music from the TV's speaker when you
connect the HDMI OUT jack of the photo frame to a TV. You can select
the music from [BGM1*], [BGM2]. Select [OFF] when you don’t want to
use the accompanying music.