Filter
Top Products
69
Customizing your camcorder
GB
While deleting data, do not apply any vibrations
or shocks to your camcorder.
The actual performing time for deleting data is
as follows;
DCR-SX34E/SX44E: about 13 minutes
DCR-SX53E/SX63E: about 60 minutes
DCR-SR58E/SR68E: about 40 minutes
DCR-SR78E/SR88E: about 60 minutes
If you stop performing [EMPTY] while
[Executing…] appears, be sure to complete the
operation by performing [MEDIA FORMAT]
or [EMPTY] when you use the camcorder
next
time.
REPAIR IMG.DB F.
See page 76, 78.
GENERAL SET
(Other setup items)
See “Using menus” (p. 54) on the operation.
The default settings are marked with .
SOUND/DISP SET
VOLUME
You can adjust the volume of playback
sound by touching
/ .
BEEP
ON
A melody sounds when you start/stop
recording, or operate the touch panel.
OFF
Cancels the melody.
LCD BRIGHT
You can adjust the brightness of the LCD
screen by touching
/ .
Tips
This adjustment does not affect the recorded
images in any way.
LCD BL LEVEL (LCD backlight level)
You can select the brightness of the LCD
screen’s backlight.
NORMAL
Standard brightness.
BRIGHT
Brightens the LCD screen.
Notes
When you connect your camcorder to the wall
outlet (wall socket) using the supplied AC
Adaptor, [BRIGHT] is automatically selected
for the setting.
When you select [BRIGHT], battery life is
slightly reduced during recording.
If you open the LCD panel 180 degrees to face
the screen outside and close the LCD panel