Sony 4-170-095-11(1) Camcorder User Manual


 
76
GB
the access lamp is turned off after recording.
This may damage your image data and
is
displayed.
is indicated on an image on the
VISUAL INDEX screen.
The image data base file may be damaged.
Check the data base file by touching
(MENU) [Show others] [REPAIR
IMG.DB F.] (under
[MANAGE MEDIA]
category) the recording medium (DCR-
SR58E/SR68E/SR78E/SR88E/SX34E/SX44E/
SX53E/SX63E). If it still appears, delete the
image with
(p. 37).
No sound or only a quiet sound is heard
during playback.
Turn up the volume (p. 29).
When you record sound with [MICREF
LEVEL] (p
. 64) set to [LOW], the recorded
sound may be difficult to hear.
Playing back images stored on
memory card on other devices
Images cannot be played back or the
memory card is not recognized.
The device may not support memory card.
Editing movies/photos on your
camcorder
Unable to edit.
Unable to edit because of the condition of the
image.
Movies cannot be added in the Playlist.
There is no free space in the recording media.
You can add no more than 99 movies to a
Playlist. Erase unnecessary movies from the
P
laylist (p. 45).
You cannot add photos in the Playlist.
A movie cannot be divided.
A movie that is too short cannot be divided.
A protected movie cannot be divided.
A photo cannot be captured from a
movie.
The recording media where you want to save
photos is full.
Dubbing/Connecting to other
devices
You cannot hear the sound on the TV
connected to your camcorder.
When you are using the S VIDEO plug,
make sure the red and white plugs of the A/V
co
nnecting cable are connected (p. 52).
The aspect ratio of the playback is not
correct when connecting your camcorder
to the TV.
Set [TV TYPE] according to your TV (p. 70).
The top, bottom, right, and left edges
of images are trimmed slightly on a
connected TV.
The LCD screen of your camcorder can
display recording images across the entire
screen (full pixel display). However, this may
cause slight trimming of the top, bottom, right,
and left edges of images when played back on
a TV which is not compatible with full pixel
display.
It is recommended you record images using
the outer frame of [GUIDEFRAME] (p
. 63)
as a guide.
Images are not dubbed correctly.
The A/V connecting cable is not connected
properly. Make sure to connect the cable to the
in
put jack of another device (p. 52).