Filter
Top Products
Installation and Connections
Installation
48
5
Insert the protrusions on the ceiling bracket (A) into
the spaces prepared in the ceiling bracket (B), and
temporarily attach them by turning the ceiling
bracket (A) with the camera clockwise.
6
Secure the ceiling brackets (A) and (B) using the
supplied three screws (3M3
× 8).
7
Connect the cables to the connectors on the rear of
the camera.
Note
Take the proper steps to ensure that the load of the
cables connected does not cause problems.
To remove the camera
1
Remove the three screws used to attach the camera
in step 6 of “Installation on a shelf, etc. in a high
position (example).”
2
Turn the camera with the bracket counterclockwise
to remove.
Ceiling bracket (B)
Ceiling
bracket (A)
P
O
W
E
R
S
T
A
N
D
B
Y
I
R
3M3 × 8
(supplied)