Filter
Top Products
Internal Boards and Switch Settings
11
J S11/S12 switches
These switches select the audio to be mixed with the audio
output to the INCOM 1 connector.
When a one ear headset is used, set the S11-3 and S11-4
switches to ON.
K S13/S14 switches
These switches select the audio to be mixed with the
program audio output to the INCOM 1 connector.
When a one ear headset is used, set the S13-1 and S13-2
switches to ON.
L S15 switch
Set according to the broadcast system.
OFF: NTSC (for the CA-590)
ON: PAL (for the CA-590P)
c AU-294 board
A S3 switch
Set according to the microphone type of the headset
connected to the INCOM 2 connector.
DYN: Dynamic-type microphone
CM: Carbon-type microphone
B S4 switch
Set to ON when an unbalanced-type headset is connected
to the INCOM 2 connector.
C S5 switch
Sets the gain for the headset connected to the INCOM 2
connector.
+ : Sets the gain 6 dB above the standard level.
0 : Standard level.
– : Sets the gain 6 dB below the standard level.
Normally, set this switch to 0.
D S7 switch
When set to ON, the audio signal input from the
TRACKER connector is mixed to the imtercom audio and
output to the INCOM 2 connector. Normally, set this
switch to OFF (center position).
E S8 switch
Specifies whether the VR of the INCOM 2 is used for
serial mix or parallel mix. Normally, set this switch to OFF.
F S10 switch
This switch is used for the intercom system connected to
the INCOM 2 connector. Normally, set this switch to
NORM.
G S11/S12 switches
These switches select the audio to be mixed with the audio
output to the INCOM 2 connector.
Switch Audio to be mixed Normal setting
S11-1 Audio from INCOM 1 ON
S11-2 Audio from INCOM 2 OFF
S11-3 Program audio 1 OFF
S11-4 Program audio 2 OFF
S12 Tracker audio ON
Switch Audio to be mixed Normal setting
S13-1 Audio from INCOM 1 OFF
S13-2 Audio from INCOM 2 OFF
S13-3 Program audio 1 ON
S13-4 Program audio 2 ON
S14 Tracker audio OFF
S10
S201
S3 S4 S5
S101
S7
S8
S251
S252
S253
S13
S14
S11
S12
H S13/S14 switches
F S10 switch
I S101 switch
E S8 switch
B S4 switch
A S3 switch
G S11/S12 switches
K S251/S252 switches
D S7 switch
L S253 switches
J S201 switches
C S5 switch
Switch Audio to be mixed Normal setting
S11-1 Audio from INCOM 1 OFF
S11-2 Audio from INCOM 2 ON
S11-3 Program audio 1 OFF