Filter
Top Products
19
Basic operations
Playing back a tape
You can monitor the playback picture in the viewfinder. You can also monitor the
picture on a TV screen, after connecting the camcorder to a TV or VCR.
(1) While pressing the small green button on the POWER switch, set it to
PLAYER.
(2) Insert the recorded tape with the window facing out.
(3) Press 0 to rewind the tape.
(4) Press ( to start playback.
To stop playback, press p.
To rewind the tape, press 0.
To fast-forward the tape rapidly, press ).
Using the remote commander
– CCD-TR516 only
You can control playback using the supplied Remote Commander. Before using the
Remote Commander, insert the R6 (size AA) batteries.
To display the viewfinder screen indicators on the TV
– CCD-TR516 only
Press DISPLAY on the Remote Commander. To erase the indicators, press DISPLAY
again.
Note on the lens cover
The lens cover does not open when the POWER switch is set to PLAYER. Do not open
the lens cover manually. It may cause malfunction.
PLAY
3
4
REW
1
DISPLAY
PLAY
REW
FF
STOP
PAUSE
SLOW
POWER
OFF
PLAYER
CAMERA
2