Filter
Top Products
51
Advanced operations
– CCD-TRV25/TRV35/TRV65 only
When the Steady Shot function is working, the camcorder compensates for camera-
shake.
You can release the Steady Shot function when you do not need to use the Steady Shot
function. The indicator appears in the viewfinder or on the LCD screen. Do not use
the Steady Shot function when shooting a stationary object with a tripod.
You can select ON or OFF in the menu system (p. 27).
To activate the Steady Shot function again
Set STEADYSHOT to ON in the menu system.
Notes on the Steady Shot function
•The Steady Shot function will not correct excessive camera-shake.
•When you set STEADYSHOT to ON or OFF in the menu system, the exposure may
fluctuate.
•Steady Shot does not operate in 16:9 FULL mode. If you set STEADYSHOT to ON in
the menu system, the indicator flashes.
Releasing the STEADY SHOT function
Connect the camcorder to your TV or VCR to watch the playback picture on the TV
screen. When monitoring the playback picture by connecting the camcorder to your TV,
we recommend you to use house current for the power source.
While playing back on a TV screen, close the LCD panel. Otherwise, picture distortion
may occur.
Watching on a TV screen