Filter
Top Products
52
Connecting directly to a TV/VCR with Video/Audio input jacks
When connecting the A/V connecting cable, make sure you connect the plug to jacks of
the same color.
Open the jack cover. With using the supplied A/V connecting cable, connect the
camcorder to the LINE IN inputs on the TV or VCR connected to the TV. Set the TV/
VCR selector on the TV to VCR. When connecting to the VCR, set the input selector on
the VCR to LINE.
Watching on a TV screen
: Signal flow
VIDEO
AUDIO
IN
VIDEO
AUDIO
CCD-TRV15/TRV25/TRV35
[a]
[b]
S VIDEO
S VIDEO
VIDEO
AUDIO
IN
VIDEO
AUDIO
– CCD-TRV65 only
If your TV or VCR has an S video jack, connect using the S video cable (not supplied)
[a] to obtain a high quality picture . If you are going to connect the camcorder using the
S video cable (not supplied) [a], you do not need to connect the yellow (video) plug of
the A/V connecting cable [b].
If your TV or VCR is a monaural type
– CCD-TRV65 only
Connect only the white plug for audio on both the camcorder and the TV or the VCR.
With this connection, the sound is monaural even in stereo model.
To connect to a TV or VCR without Video/Audio input jacks
Use an RFU adaptor (not supplied).
CCD-TRV65
: Signal flow
(not supplied)