Filter
Top Products
57
Additional information
The fader function does not work.
The title display position shifts.
Recording stops in a few seconds.
The autofocusing function does not
work.
The SteadyShot function does not
activate. (CCD-TR96/TR916 only)
The date or time indicator
disappears.
The date or time indicator is flashing.
Trouble check
Symptom Cause and/or Corrective Actions
• The lithium battery is weak or dead.
m Replace the lithium battery with a new one. (p. 45)
• You pressed DATE and TIME together for more than 2
seconds. The camcorder is not malfunctioning.
m You may start recording. Flashing will stop soon.
• Reset the date and time. (p. 46)
• STEADY SHOT is set to OFF.
m Set STEADY SHOT to ON. (p. 42)
• The SteadyShot function does not work when the wide
mode is set to 16:9FULL.
• FOCUS is set to MANUAL.
m Set it to AUTO (p. 32)
• Shooting conditions are not suitable for autofocus.
m Set FOCUS to MANUAL to focus manually. (p. 32)
• START/STOP MODE switch is set to or 5 SEC.
m Set it to . (p. 26)
• There are unwanted blanks before or after the title.
m Delete them then select ↵.
• The START/STOP MODE switch is set to 5 SEC or .
m Set it to . (p. 26)
• LIGHT is set to AUTO.
m Set it to ON. (p. 36)
• LIGHT is set to AUTO.
m Set it to ON. (p. 36)
• Bulb is dead.
m Replace the bulb. (p. 37)
The built-in light turns off while in
use.
The built-in light turns on and off
repeatedly.
The built-in light does not turn on
when LIGHT is set to ON.
Continued to the next page