Filter
Top Products
7
Getting started
Battery life
Recording time with the built-in light on is indicated in parentheses.
CCD-TR86
Charging and installing the battery pack
Battery pack NP-33 NP-60D NP-C65 NP-68 NP-78 NP-80/80D NP-98/98D
(supplied)
Typical recording 50 75 90 105 135 155 175
time** (25) (40) (45) (55) (75) (80) (90)
Continuous 95 140 165 190 250 280 320
recording time*** (45) (70) (85) (100) (140) (145) (165)
CCD-TR96/TR916
Battery pack NP-33 NP-60D NP-C65 NP-68 NP-78 NP-80/80D NP-98/98D
(supplied)
Typical recording 50 75 90 100 130 150 175
time** (25) (40) (45) (55) (75) (75) (90)
Continuous 95 135 160 185 240 270 315
recording time*** (45) (70) (85) (100) (135) (140) (160)
Notes on charging the battery pack
• The POWER lamp will remain lit for a while even if the battery pack is removed and
the AC power cord is unplugged after charging the battery pack. This is normal.
• If the POWER lamp does not light, set the selector to VTR (DC OUT) and disconnect
the power cord. After about one minute, reconnect the AC power cord and set the
selector to CHARGE again.
• You cannot operate the camcorder using the AC power adaptor while charging the
battery pack.
** Approximate minutes when recording while you repeat recording start/stop,
zooming and turning the power on/off.
The actual battery life may be shorter.
*** Approximate continuous recording time indoors.
To remove the battery pack
Slide the battery pack in the direction of the arrow.