Sony CMR-PC4 USB Digital Camera User Manual


 
12
Using Your Camera
This section describes how to attach the camera to a computer and how
to handle the camera.
When using the CMR-PC2 USB or CMR-PC3 USB, see Connecting
the CMR-PC2 USB/CMR-PC3 USB to a Computer. When using the
CMR-PC4 USB, see Connecting the CMR-PC4 USB to a Computer.
Connecting the CMR-PC2 USB/CMR-PC3 USB to a Computer
You can connect or disconnect your camera to or from the computer
while the computer is powered on. For details on the location of the
USB connector, please see the instruction manual for the computer.
Note
Do not connect or disconnect the cameras USB cable during startup or shut down of
Windows. This could cause your camera or computer to malfunction.
Do not connect or disconnect the cameras USB cable during startup or shut down of
software used with the camera. This could result in unstable operation of the computer.
Mounting the Camera on a Notebook Computer
Attach your camera to the notebook computer, and then connect the
USB cable to the USB connector on the notebook computer.
Extend the arm plate by hand and hook the camera onto the display panel as shown in the
figure below.
Mounting the Camera on a Desktop Computer
Connect the USB cable from your camera to the USB connector on the
desktop computer.
Use the camera monitor mount provided to secure the camera to the
top of the computer display.
Arm plate