Filter
Top Products
Near tuner devices such as TVs or radio. Noise may occur.
On a sandy beach or anywhere dusty. If sand or dust gets in your camcorder, it may malfunction.
Sometimes this malfunction cannot be repaired.
Near windows or outdoors, where the LCD screen, or the lens may be exposed to direct sunlight.
This damages the LCD screen.
Operate your camcorder on DC 6.8 V/7.2 V (battery pack) or DC 8.4 V (AC Adaptor).
For DC or AC operation, use the accessories recommended in these operating instructions.
Do not let your camcorder get wet, for example, from rain or sea water. If your camcorder gets wet, it
may malfunction. Sometimes this malfunction cannot be repaired.
If any solid object or liquid gets inside the casing, unplug your camcorder and have it checked by a
Sony dealer before operating it any further.
Avoid rough handling, disassembling, modifying, physical shock, or impact such as hammering,
dropping or stepping on the product. Be particularly careful of the lens.
Keep the LCD screen closed when you are not using your camcorder.
Do not wrap your camcorder with a towel, for example, and operate it. Doing so might cause heat to
build up inside.
When disconnecting the power cord (mains lead), pull it by the plug and not the cord.
Do not damage the power cord (mains lead) such as by placing anything heavy on it.
Do not use a deformed or damaged battery pack.
Keep metal contacts clean.
If the battery electrolytic liquid has leaked:
Consult your local authorized Sony service facility.
Wash off any liquid that may have contacted your skin.
If any liquid gets in your eyes, wash with plenty of water and consult a doctor.
When not using your camcorder for a long time
To keep your camcorder in optimum state for a long time, turn it on and let it run by recording and
playing back images about once a month.
Use up the battery pack completely before storing it.
Note on the camcorder/battery pack temperature
When the temperature of the camcorder or battery pack becomes extremely high or extremely low,
you may not be able to record or play back on the camcorder, due to the protection features of the
camcorder being activated in such situations. In this case, an indicator appears on the LCD screen.
Notes on charging through the USB cable
Operation with all computers is not assured.
If you connect the camcorder to a laptop computer that is not connected to a power source, the
battery of the laptop computer will continue to use up its charge. Do not leave the camcorder
connected to a computer in this manner.
Charging with a personally assembled computer, with a converted computer, or through a USB hub
are not guaranteed. The camcorder may not function correctly depending on the USB device which is
used with the computer.
When the camcorder is connected to a computer or accessories
Do not try to format the recording media of the camcorder using a computer. If you do so, your
camcorder may not operate correctly.
When connecting the camcorder to another device with communication cables, be sure to insert the
connector plug in the correct way. Pushing the plug forcibly into the terminal will damage the terminal
and may result in a malfunction of the camcorder.
When the camcorder is connected to other devices through a USB connection and the power of the
camcorder is turned on, do not close the LCD panel. The image data that has been recorded may be
lost.
Notes on optional accessories
186