Filter
Top Products
operation for about 2 minutes, to save battery power ([Power Save]).
Charging time
Approximate time (min.) required to fully charge a fully discharged battery pack.
HDR-CX280/ CX280E/ CX290/ CX290E/ CX320/ CX320E/ CX380/ CX380E/ CX390E/
PJ220/ PJ220E/ PJ230/ PJ230E
Battery pack AC Adaptor
NP-FV30 (supplied) 115
NP-FV50 155
NP-FV70 195
NP-FV100 390
HDR-PJ320E/ PJ380/ PJ380E/ PJ390E
Battery pack AC Adaptor
NP-FV50 (supplied) 155
NP-FV70 195
NP-FV100 390
The charging times shown in the table above are measured when charging the camcorder at a room
temperature of 25 °C (77 °F). It is recommended that you charge the battery in a temperature range
of 10 °C to 30 °C (50 °F to 86 °F).
To remove the battery pack
Close the LCD screen. Slide the BATT (battery) release lever ( ) and remove the battery pack ( ).
To use your camcorder continuously for a long time
Connect the AC Adaptor and the power cord (mains lead) to your camcorder and the wall outlet (wall
socket). [Details]
By using the AC Adaptor, you can use your camcorder without worrying about the battery running out of
charge.
Notes on the AC Adaptor
Do not short-circuit the DC plug of the AC Adaptor or battery terminal with any metallic objects. This
may cause a malfunction.
Disconnect the AC Adaptor from the camcorder, while holding both the camcorder and the DC plug.
Related topics
Information on supplied items: Differences in supplied items
35