Filter
Top Products
You cannot see the backed-up movies on the camcorder. By connecting the camcorder to a
computer after repairing the database, you can import backed-up high definition image quality (HD)
movies to the computer using the “PlayMemories Home” software installed on the computer.
However, it is not guaranteed that all movies can be imported to the computer.
Buffer overflow. Writing to the media was not completed in time.
You have performed recording and erasing operations repeatedly, or a memory card that has been
formatted by other device is used. Copy and take data backup to other device (such as a computer),
and then format the memory card on the camcorder. [Details]
The size of the inserted memory card is not sufficient for copying the movie(s). Use the
recommended memory card. [Details]
Recovering data.
Your camcorder tries to recover data automatically if the data writing was not performed properly.
Cannot recover data.
Writing data onto the media of the camcorder has failed. Attempts were made to recover the data,
but they were unsuccessful.
Reinsert the memory card.
Reinsert the memory card a few times. If the indicator continues to flash even after reinserting, the
memory card could be damaged. Try with another memory card.
Cannot recognize this memory card. Format and use again.
Format the memory card. Note that when you format the memory card, all the recorded movies and
photos are deleted. [Details]
The maximum number of still image folders has been reached. Cannot
record still images.
You cannot create folders exceeding 999MSDCF. You cannot create or delete created folders using
your camcorder.
Format the memory card, or delete folders using your computer. [Details]
This memory card may not be able to record or play movies.
This memory card may not be able to record or play images correctly.
Use a memory card recommended for your camcorder. [Details]
Do not eject the memory card during writing. Data may be damaged.
Reinsert the memory card.
External media cannot execute functions.
Check the data base file by selecting [Setup] [ Media Settings] [Repair Img.
DB F.]
the recording medium.
If even then the indicator flashes, reconnect the external media device, and then perform the format.
180