Filter
Top Products
62
GB
No memory card is inserted (p. 19).
When the indicator flashes, there is not
enough free space for recording images. Delete
unn
eces
sary images (p. 35), or format the
memory card after storing the images on other
media.
The Image Database File is damaged. Check
the data base file by touching
(MENU)
[Setup] [
(Media Settings)]
[Repair Img. DB F.] the recording
medium (HDR-CX560E/CX560VE/CX700E/
CX700VE).
The memory card is damaged. Format the
memory card with your camcorder (p. 57).
Incompatible memory card is inserted (p. 19).
The memory card is write-protected.
Access to the memory card was restricted on
another device.
There is something wrong with the flash.
The amount of light is not sufficient. Use the
flash.
The camcorder is unsteady. Hold the camcorder
steady with both hands. However, note that
the camera-shake warning indicator does not
disappear.
The recording media is full. Delete unnecessary
images (
p. 35).
Photos cannot be recorded during processing.
Wait for a while, then record.
When [
REC Mode] is set to [Highest
Quality
] or [50p Quality ], you cannot
capture photos while recording movies.
Furthermore, if [
Frame Rate] is set to [25p],
you cannot record photos while the camcorder
is in movie recording standby mode.