Sony DCR-PC104E Camcorder User Manual


 
20
— Getting Started —
Using this manual
LOCK
MEMORY
CAMERA
VCR
(CHG)OFF
POWER
The instructions in this manual are for the
3 models listed in the table on the next page.
Before you start reading this manual and
operating your camcorder, check the model
number by looking at the bottom of your
camcorder. The DCR-PC105E is the model used
for illustration purposes. Otherwise, the model
name is indicated in the illustrations. Any
differences in operation are clearly indicated in
the text, for example, “DCR-PC105E only.”
As you read through this manual, buttons and
settings on your camcorder are shown in capital
letters.
In sections from “Advanced Recording
Operations” onward, position of the POWER
switch is shown by the icons below.
: Set the POWER switch to
PLAYER.
(DCR-PC103E only)
: Set the POWER switch to VCR.
(DCR-PC104E/PC105E only)
: Set the POWER switch to
CAMERA.
: Set the POWER switch to
MEMORY.
(DCR-PC105E only)
All operations you carry out are indicated by a
beep.
— Préparatifs —
Utilisation de ce manuel
Les instructions contenues dans ce manuel
s’appliquent aux 3 modèles répertoriés dans le
tableau de la page suivante. Avant de lire ce
manuel et d’utiliser le caméscope, vérifiez le
numéro de modèle indiqué sous votre caméscope.
Les illustrations de ce mode d’emploi représentent
le DCR-PC105E. S’il s’agit d’un autre modèle, son
nom est indiqué dans l’illustration. Toute différence
de fonctionnement est clairement signalée dans le
texte, par exemple, « DCR-PC105E seulement ».
Dans ce manuel, les touches et les réglages de votre
caméscope sont toujours indiqués en majuscules.
Dans les sections qui suivent celle intitulée
« Opérations d’enregistrement avancées », la
position du commutateur POWER est illustrée
par les icônes ci-dessous.
: Réglez le commutateur POWER
sur PLAYER.
(DCR-PC103E seulement)
: Réglez le commutateur POWER
sur VCR.
(DCR-PC104E/PC105E seulement)
: Réglez le commutateur POWER
sur CAMERA.
: Réglez le commutateur POWER
sur MEMORY.
(DCR-PC105E seulement)
Chaque opération effectuée est confirmée par un
signal sonore.