Filter
Top Products
4
DCR-SR35E/SR36E/SR45E/SR46E/SR55E/SR65E/SR75E/SR85E
PartNumber: 4-109-555-11(1)
Note
is equipment has been tested and found
to comply with the limits for a Class B
digital device, pursuant to Part 15 of the
FCC Rules.
ese limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
is equipment generates, uses, and
can radiate radio frequency energy and,
if not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined
by turning the equipment o and on,
the user is encouraged to try to correct
the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on
a circuit di erent from that to which the
receiver is connected.
Consult the dealer or an experienced radio/
TV technician for help.
e supplied interface cable must be used
with the equipment in order to comply
with the limits for a digital device pursuant
to Subpart B of Part 15 of FCC Rules.
Battery pack
is device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:(1) is device
may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
Notes on use
Supplied items
e numbers in ( ) are the supplied
quantity.
AC Adaptor (1)
Power cord (Mains lead) (1)
Handycam Station (1) (DCR-SR55E/SR65E/
SR75E/SR85E)
A/V connecting cable (1)
USB cable (1)
Wireless Remote Commander (1) (DCR-
SR55E/SR65E/SR75E/SR85E)
A button-type lithium battery is already
installed.
Rechargeable battery pack NP-FH40 (1)
21-pin adaptor (1) (DCR-SR55E/SR65E/SR75E/
SR85E)
For the models with the
mark printed on
their bottom surfaces only.
CD-ROM “Handycam Application So ware”
(1) (p. 25)
Picture Motion Browser (So ware)
PMB Guide
Handycam Handbook (PDF)
“Operating Guide” ( is manual) (1)
Using the camcorder
e camcorder is not dustproofed, dripproofed
or waterproofed. See “Precautions” (p. 31).
Do not do any of the following when the
(movie)/ (still image) lamps (p. 11) or
ACCESS lamps (p. 13, 18) is lit or ashing.
Otherwise the media may be damaged, recorded
images may be lost or other malfunctions could
occur.
Remove the “Memory Stick PRO Duo.”
Remove the battery pack or AC Adaptor from
the camcorder.
Apply mechanical shock or vibration to the
camcorder.
When connecting your camcorder to another
device with a cable, be sure to insert the
connector plug in the correct way. Pushing the
plug forcibly into the terminal will damage the
termina
l
your cam
Do not a
camcord
not be re
may not
Do not u
e hard
recogniz
To prote
by dropp
function
gravity c
this func
also be r
drop re
p
stopped.
When th
becomes
may not
camcor
d
camcord
In this ca
screen (p
Do not t
area, wh
meters (
hard dis
k
If you re
long tim
media. Im
such a ca
external
FORM
A
Fasten th
correctly
To adjus
90 degre
to the be
You can
the lens