Filter
Top Products
72
GB
Memory card
Operations using the memory card
cannot be performed.
If you use the memory card formatted on a
computer, format it again on your camcorder
(p. 66).
Images stored on the memory card
cannot be deleted.
The maximum number of images that you can
delete on the index screen at one time is 100.
You cannot delete the protected images.
The data file name is not indicated
correctly or flashes.
The file is damaged.
The file format is not supported by your
ca
mcorder (p. 83).
Recording
Refer also to “Memory card” (p. 72).
Pressing START/STOP or PHOTO does not
record images.
The playback screen is displayed. Press MODE
to display the
(Movie) or (Photo) icons.
Your camcorder is recording the image you
have just shot on the recording media. You
cannot make new recording during this
period.
The recording media is full. Delete
unn
e
cessary images (p. 35).
Total number of movie scenes or photos
exceeds the recordable capacity of your
c
amcorder (p. 79, 80). Delete unnecessary
ima
ges (p. 35).
While [DROP SENSOR] i
s ac
tivated (p. 69),
you may not record images (DCR-SR15E
/SR20E).
The temperature of your camcorder is
extremely high. Turn off your camcorder and
leave it for a while in a cool place.
The temperature of your camcorder is
extremely low. Turn off your camcorder and
take it to a warm place. Leave the camcorder
there for a while, then turn on the camcorder.
The access lamp remains lit or flashing
even if recording was stopped.
Your camcorder is recording the scene you
have just shot on the memory card.
The imaging field looks different.
The imaging field may look different
depending on the condition of your
camcorder. This is not a malfunction.
The actual recording time for movies is
less than the expected recording time of
the recording media.
Depending on the recording conditions, the
time available for recording may be shorter, for
example when recording a fast moving object,
et
c. (p
. 79).
The camcorder stops operating.
The temperature of your camcorder is
extremely high. Turn off your camcorder and
leave it for a while in a cool place.
The temperature of your camcorder is
extremely low. Turn off your camcorder and
take it to a warm place. Leave the camcorder
there for a while, then turn on the camcorder.
If you keep applying vibration on the
camcorder, recording may stop.
There is a time difference between the
point when START/STOP is pressed and
the point that the recording movie is
started or stopped actually.
On your camcorder, there may be a slight
time difference between the point where you
press START/STOP and the actual point that
recording movie starts/stops. This is not a
malfunction.