Sony DCR-TRV22 Camcorder User Manual


 
40
To display the screen indicators – Display function
Press DSPL/BATT INFO on your camcorder or DISPLAY on the Remote Commander
supplied with your camcorder.
The indicators disappear from the screen.
To make the indicators appear, press DSPL/BATT INFO or DISPLAY on the Remote
Commander again.
About date/time and various settings
Your camcorder automatically records not only images on the tape but also the
recording data (date/time or various settings when recorded) (Data code).
Follow the steps below to display the data code using the touch panel or the Remote
Commander.
Using the touch panel
(1) Set the POWER switch to VCR, then play back the tape.
(2) During playback, press FN and select PAGE2.
(3) Press DATA CODE.
(4) Select CAM DATA or DATE DATA, then press
OK.
(5) Press EXIT.
[a] Tape counter or time code
[b] SteadyShot off
[c] Exposure
[d] White balance
[e] Gain
[f] Shutter speed
[g] Aperture value
Playing back tape
DSPL/BATT INFO
DATA CODE
DISPLAY
Date/time
JUL 4 2003
12:05:56 PM
50min
0:00:23:01
AUTO
50min
0:00:23:01
6
0
AWB
F1.8
9
dB
[a]
[b]
[c]
[d]
[e]
[f]
[g]
Various settings