Sony DCR-TRV22 Camcorder User Manual


 
80
Searching for a photo – Photo search/Photo scan (DCR-TRV19 only)
(4) Select OFF, then press EXEC.
(5) Press SEARCH MODE on the Remote Commander repeatedly, until the
PHOTO SEARCH indicator appears.
The indicator changes as follows:
(6) Press . or > on the Remote Commander to select the photo for playback.
Each time you press . or >, your camcorder searches for the previous or
next photo.
Your camcorder automatically starts playback of the photo.
To stop searching
Press x on the Remote Commander or on your camcorder.
Scanning photo
The POWER switch should be set to .
(1) Press SEARCH MODE on the Remote Commander repeatedly, until the
PHOTO SCAN indicator appears.
The indicator changes as follows:
* TITLE SEARCH appears only when CM SEARCH is set to ON in the menu
settings.
(2) Press . or > on the Remote Commander.
Each photo is played back for about 5 seconds automatically.
To stop scanning
Press x on the Remote Commander or on your camcorder.
If a tape has a blank section between recorded sections
PHOTO SEARCH and PHOTO SCAN may not work correctly.
The available number of photos that can be searched using the cassette memory
The available number is up to 12 photos. However, you can search 13 photos or more
using the photo scan function.
tTITLE SEARCH* t DATE SEARCH t PHOTO SEARCH
(no indicator) T PHOTO SCAN T
1
SEARCH
MODE
2
PHOTO 00
SCAN
tDATE SEARCH tPHOTO SEARCH
(no indicator) T PHOTO SCAN T