Filter
Top Products
12
[ To check the remaining battery charge
Press POWER button to turn on and check the remaining battery charge on the LCD screen.
• If the NP-FD1 battery pack (not supplied) is used, the minute display ( 60 Min) is also shown after
the remaining charge indicator.
• It takes about one minute until the correct remaining charge indicator appears.
• The remaining charge indicator may not be correct under certain circumstances.
• The Clock Set screen appears when you turn on the camera for the first time (page13).
[ To remove the battery pack/“Memory Stick Duo”
Open the battery/“Memory Stick Duo” cover.
• Never remove the battery pack/“Memory Stick Duo” when the access lamp is lit. This may cause damage
to data in the “Memory Stick Duo”/internal memory.
• Use the NP-BD1 battery pack (supplied) only with this camera.
Remaining
charge
indicator
Status Sufficient
power
remaining
Battery
almost fully
charged
Battery half
full
Battery low,
recording/
playback
will stop
soon.
Change the battery
with fully charged
one, or charge the
battery. (The warning
indicator flashes.)
Slide the battery eject lever.
Be sure not to drop the battery pack.
Make sure that the access lamp is not lit,
then push the “Memory Stick Duo” in once.
Battery pack“Memory Stick Duo”