Sony DNW-90WSP Camcorder User Manual


 
Chapter 2 Locations and Functions of Parts and Controls 2-9
2
8 AUDIO IN CH-1/CH-2 (audio channel 1 and channel 2 input)
connectors (XLR type, 3-pin, female) and LINE/MIC/+48 V ON
(line input/microphone input/external power supply +48 V on)
selectors
These are the audio input connectors for channels 1 and 2, to which you
can connect a microphone or other audio sources.
The LINE/MIC/+48 V ON selectors select the audio input signal source
connected to these connectors, as follows:
LINE: Line input audio equipment
MIC: A microphone with internal batteries
+48 V ON: A microphone with an external power supply system
9 DC OUT (DC power output) connector
This connector supplies power for a WRR-28H/28M/28L/860A UHF
Portable Tuner (not supplied).
Alternatively, it can supply power for a BVR-3 Remote Control Unit
combined with a VA-DN1 Camcorder Interface Adaptor.
Note
The type of UHF portable tuner which can be connected depends on the
country where the camcorder is used.
For more information, consult your Sony representative.