Filter
Top Products
24
GB
Operations in an initial state
When this unit is turned on without a memory
card inserted, the initial display below appears
on the screen.
If this unit is not operated for 10 seconds, the
demo mode is displayed. If any other button
than the power button is pressed, the screen
returns to the initial display.
First, press MENU during the initial display,
and then set the current date and time. (See next
section)
Setting the current date
and time
1 Press MENU.
2 Press B/b to select the
(Settings) tab.
Tips
You can only use the B/b buttons when the
clock and calendar settings item (page 29) is not
selected.
3 Press
v
/V
to select [Date/time
Settings] and then press .
4
Adjust the date.
1Press v/V to select [Date] and then
press .
2Press B/b to select year, month, and
day, and then press v/V to select a
value, then press .
5
Adjust the time.
1Press v/V to select [Time] and then
press .
2Press B/b to select hour, minute, and
second, and then press v/V to select a
value, then press .
6 Select the format of the date.
1Press
v
/V
to select [Date Display Order]
and then press
.