Filter
Top Products
depending on the image when you shoot a JPEG image.
[292] Troubleshooting Troubleshooting Others
Settings are reset even though resetting operation has
not been performed.
The camera settings may be reset if the battery pack is ejected while the power is on.
When ejecting the battery pack, first turn the power off and check that the access lamp is
not illuminated before ejecting.
[293] Troubleshooting Troubleshooting Others
The product does not work properly.
Turn off the product. Remove the battery pack and insert it again. If the product is hot,
remove the battery pack, and allow it to cool down before trying this corrective procedure.
If an AC-UD10/AC-UD11 AC Adaptor (sold separately) is used, disconnect the power
cord. Connect the power cord and turn on the product again. If the product repeats the
same error often or still does not work after trying these solutions, consult your Sony
dealer or local authorized Sony service facility.
[294] Troubleshooting Troubleshooting Others
A sound is produced when the product is shaken.
Sound may be produced when the product is shaken while the power is turned off, but
this is not a malfunction.
[295] Troubleshooting Troubleshooting Others
“--E-” appears on the screen.