Filter
Top Products
71
Still image printing (PictBridge printer)
When [USB Connect] is not set
to [PictBridge] on the Setup
screen
Even if you turn on the camera, you cannot
use the PictBridge function.
Disconnect the USB cable from the USB
cradle and set [USB Connect] to
[PictBridge].
Printing images
Mode switch: / /
You can select the image and print it. Set up
the camera following the procedure on page
70, and connect the printer.
• You cannot print movies.
• When you print an E-mail image, only the
JPEG image that was recorded at the same time
is printed.
• When an error notification is received from the
connected printer, the indicator flashes for
approximately 5 seconds. Check the connected
printer.
In single-image mode
a Display the image you want to
print with b/B.
b Press MENU.
The menu appears.
c Select (Print) with b/B, then
press z.
d Select [This image] with v/V,
then press z.
The print setting screen appears.
• Items that the printer does not support are
not displayed.
e Select [Quantity] with v/V,
select the number of sheets
with b/B.
You can select the number up to 20.
Mode switch
MENU
Control button
101
2/9
5M
Exit
OK
1
Off
Off
Index
Date
Quantity
Print