Filter
Top Products
4
Prepare the battery pack
• Connect the battery charger to an easily accessible wall outlet (wall socket) close by.
• Even if the CHARGE lamp is not lit, the battery charger is not disconnected from the AC power source
(mains) as long as it is connected to the wall outlet (wall socket). If some trouble occurs while using the
battery charger, immediately shut off the power by disconnecting the plug from the wall outlet (wall
socket).
• When charging is finished, disconnect the power cord (mains lead) from the wall outlet (wall socket), and
remove the battery pack from the battery charger.
• Time required to charge a fully depleted battery pack (supplied) at a temperature of 25°C (77°F). Charging
may take longer under certain circumstances or conditions.
Full charge Normal charge
Approx. 235 min. Approx. 175 min.
1 Insert the battery pack.
Push the battery pack until it clicks.
2 Connect the power cord (mains lead).
Power cord (mains lead)
3 To wall
outlet (wall
socket)
Battery
charger
CHARGE lamp
Light on: Charging
Light off: Completed (Normal Charge)
If you continue charging the battery pack for approximately one more hour, until it is fully
charged (Full Charge), the battery life will be slightly longer.
4 Insert the charged battery pack.
While sliding the battery
cover open lever, open
the battery cover.
Firmly insert the battery pack all
the way while pressing the lock
lever with the tip of the battery.
Close the cover.
Lock lever