Filter
Top Products
6
Attach a lens
1 Remove the body cap from the camera and the rear cap from
the lens.
• Make sure not to leave the interior of the camera exposed to dust or water
droplets.
If dust enters the camera, perform [Cleaning mode] (t “User’s Guide/Troubleshooting” (page
125)) and brush the dust away using a commercially available blower brush.
2 Attach the lens.
• When attaching a lens, do not press the lens release button.
• Do not use force when attaching a lens.
• When shooting without the flash, using a lens hood is recommended to prevent unnecessary
light from affecting your images. For details on attaching the lens hood, refer to the operating
instructions supplied with the lens.
Body cap
Rear cap
Mount the lens by aligning the orange
index marks on the lens and camera.
Turn the lens clockwise until it
clicks into the locked position.
Orange index marks