Filter
Top Products
Chapter 1 Overview
12 Chapter 1 Overview
Location and Function of Parts
Right Side View
Front section
1 EZ FOCUS button
2 EDIT SEARCH buttons
3 LIGHT switch
4 EZ MODE button and indicator
5 ZEBRA button and indicator
6 A.IRIS MODE switch and indicator
7 MENU switch
8 W.BAL switch
9 MENU dial
0 POWER switch
!¡ OUTPUT/DL/DCC+ switch
!™ NG button
!£ GAIN switch
!¢ ATW button and indicator
1 EZ FOCUS button
Press this button to turn the “easy focus” function on.
This opens the iris, to make it easier to focus before
beginning shooting. The indication “EZ FOCUS”
appears in the viewfinder while the function is on; to
turn it off, press the EZ FOCUS button again. If left
on, the function automatically turns off after about ten
seconds.
Note
If the “easy focus” function is still on when you press
the VTR button, it turns off automatically and
recording starts about one second later.
2 EDIT SEARCH buttons
You can see the search playback while pressing either
of these buttons at recording pause mode to quickly
find the next recording start point. Two playback
speeds are available, and press either of the buttons to
the inner position to increase the speed.
3 LIGHT (video light) switch
Controls the video light connected as follows.
AUTO: turns on the video light at recording if the
power switch on the light is set on.
MAN (manual): allows the power switch on the
video light to turn the light on and off.