Filter
Top Products
87
Menu Organization and Operation
Chapter 5 Menu Displays and Detailed Settings
AUTO IRIS 2 IRIS WINDOW 1/2/3/4/5/VAR 1 – Selects the auto iris detection
window. VAR is variable.
A P R St
IRIS WINDOW IND OFF/ON OFF Turns on and off the function which
displays a frame marker for the auto
iris detection window.
–
IRIS LEVEL (–99 to 99) 0 Adjusts level of the auto iris target
value.
A P Sc R St
IRIS APL RATIO Adjusts mix ratio of auto iris detection
peak value and average value.
IRIS VAR WIDTH 20 to 465 245 Adjusts width of detection frame
when the auto iris detection window is
set to VAR.
A P
IRIS VAR HEIGHT NTSC: 20 to
120
PAL: 20 to 142
NTSC:
72
PAL: 85
Adjusts height of detection frame
when the auto iris detection window is
set to VAR.
IRIS VAR H POS –452 to 452 0 Adjusts horizontal position of
detection frame when the auto iris
detection window is set to VAR.
IRIS VAR V POS NTSC: –101 to
100
PAL: –122 to
122
0 Adjusts vertical position of detection
frame when the auto iris detection
window is set to VAR.
IRIS SPEED (–99 to 99) 0 Adjusts auto iris speed. A P Sc R St
CLIP HIGH LIGHT OFF/ON OFF Turns on and off the function which,
during auto iris adjustment, ignores
very bright areas by dulling the
reaction to high luminescence.
A P
FUNCTION 3 WHT FILTER INH OFF/ON OFF – Turns on and off the function which
inhibits independent white memory
for each filter position.
A P
COLOR BAR SEL SMPTE/EBU/
SNG
NTSC:
SMPTE
PAL:
EBU
Selects color bar type.
REC TALLY UPPER/BOTH UPPER Selects whether to light the upper
tally indicator only, or both upper and
lower tally indicators.
USER & ALL ONLY OFF/ON OFF Sets to show only USER menu in the
TOP menu.
RM COMMON
MEMORY
Selects whether or not to share
settings for when a remote control
unit is connected and when the
camcorder is used alone.
RM REC START RM/CAM/
PARA
RM When a remote control unit is
connected, selects which REC
buttons are enabled (Remote control
only, the camcorder only, or both).
i.LINK CTL ALL, REC/P,
OFF
REC/P Sets the control command output
from the i.LINK DV OUT connector.
See “Settings required for an i.LINK
connection” on page 41.
i.LINK CTL(END) OFF/ON OFF Selects whether or not to stop the
tape on the external equipment via
the i.LINK cable when the battery of
the camcorder is exhausted.
Page Item Settings Default USER
menu
Description File