Filter
Top Products
14
Basic Functions
Mode Condition
Basic settings
Mode Power On
Power Off
1)
IFC
2)
Initializing
3)
During displaying
Other Status
Memory Command
Command a still image
Address Set aaaaaa
IF_Clear aaaaaa
CAM_Power On a ××aa×
CAM_Power Off a ××aa×
CAM Version Inq. aaaaaa
CAM_Power Inq. aaaaaa
BlockInquiry ×××aa×
InquiryCommand (and similar commands) ×××aa×
1) DC power is being supplied, but the camera has been turned off by a VISCA command.
2) The period from the time IF Clear is sent, until the Reply Packet is returned.
3) The period from the time DC power is turned on or the camera is turned on via a VISCA command, and the lens is initialized, u
ntil the video signal is output. Or the
period from the time the CAM Power ON command is sent, until Completion is returned.